Roll Paper Holder
The optional roll paper holder (#8310) allows you to use your printer with 8.5 inch (216 mm) roll paper. Follow these steps to install and use the roll paper holder:
1.Turn off the printer and remove the paper guide.
2.Position the roll paper holder beneath the printer as shown below. Fit the two holes in the base onto the two positioning pegs on the bottom of the printer.
wCaution:
Be careful to avoid dropping the roll paper holder when lifting the printer. Only the printer’s weight holds it in place.
3.Push the paper release lever to the
4.Cut the leading edge of the roll paper straight across. Slide the roll paper holder shaft through the center of the roll.
104Options and Consumables