The printer’s page length setting may not match the size of the continuous paper you are using.

Check the Page length for tractor setting in Default Setting mode. See page 68.

Regular gaps occur in the printout.

Cause

What to do

 

 

One-inch skip-over-

Set skip-over-perforation to Off in

perforation may be set.

Default Setting mode. See page 67.

Paper Handling

Single sheets do not feed properly

Paper does not feed.

Cause

What to do

 

 

Continuous paper may be

Remove the continuous paper. Set the

left in the printer.

paper release lever to the single-sheet

 

position. Insert a new sheet.

 

 

The paper on the paper

Move the paper (and the edge guides) a

guide is positioned too far

little to the left or right.

to the left or right for the

 

printer to detect it.

 

84Maintenance and Troubleshooting