Using the error indicators
If your printer stops working and one or more control panel lights are on or flashing or the printer beeps, use the following table to diagnose and fix the problem. If you cannot fix your problem using this table, go to the next section.
Panel light | Beep | Problem | |
state | pattern |
| |
Solution | |||
|
| ||
|
|
| |
n Pause | – | The printer is paused. | |
|
|
| |
|
| Press the Pause button to resume printing. | |
|
|
| |
| ••• | Paper from another paper source is | |
|
| currently in the paper path. | |
|
|
| |
|
| Move the paper release lever to the | |
|
| correct position and press the Load/Eject | |
|
| button to clear the paper from the paper | |
|
| path. Then set the lever to the position | |
|
| you want to use. Press the Pause button to | |
|
| turn off the Pause light, if necessary. | |
|
|
| |
n Paper Out | ••• | No paper is loaded in the selected paper | |
n Pause |
| source. | |
|
|
| |
|
| Load paper in the printer. Then press the | |
|
| Pause button to turn off the Pause light, if | |
|
| necessary. | |
|
|
| |
| ••• | The paper is not loaded correctly. | |
|
|
| |
|
| Remove your paper and reload it. Then | |
|
| press the Pause button to turn off the | |
|
| Pause light, if necessary. | |
|
|
| |
| ••• | Paper is jammed in the printer. | |
|
|
| |
|
| Turn off the printer and open the printer | |
|
| cover, tear off the paper supply, and turn | |
|
| the paper feed knob to eject the | |
|
| remaining paper. | |
|
|
|
Maintenance and Troubleshooting | 77 |