5.After you set the tear-off position, press the Pause button to exit Micro Adjust mode.
6.Tear off the printed pages.
When you resume printing, the printer automatically feeds the paper back to the top-of-form position and begins printing.
Note:
Your tear-off position setting remains in effect until you change it, even if you turn off the printer. (If you want to restore the printer’s default tear-off position, you can reset the printer. See page 73 for instructions.)
Printing on Single SheetsYou can load single sheets of paper one at a time using the printer’s paper guide.
Before printing on single-sheet multipart forms, envelopes, or other special paper, make sure the paper thickness lever is set to the correct position. See “Printing on Special Paper” on page 29.
Note:
❏Load only one sheet at a time.
❏To load a stack of single-sheet paper, use the optional cut-sheet feeder. (See page 98 for more information.)
❏For detailed specifications on the types of single-sheet paper you can use, see page 115.
❏You can use the paper guide to load single-sheet carbonless multipart forms that are fastened at the top by line gluing.
❏Insert multipart forms in the paper guide, bound edge first and printable side down.