8.Turn on the printer. Then hold down the LF/FF button to feed one page.
9.Release the sprocket lock levers on the pull tractor and adjust the sprockets to match the width of the paper you are using. Make sure the sprockets on both tractors are aligned so that the paper is not crooked.
10.Open the sprocket covers. Fit the holes of the paper over the tractor pins and adjust the sprockets as necessary. Close the sprocket covers.
11.If there is slack in the paper between the push and pull tractors, push in and turn the paper feed knob on the right side of the pull tractor to remove the slack.
12.Make sure the paper is not crooked or wrinkled and then lock the sprockets in place.
13.Replace the printer cover and the paper guide.
Options and Consumables | 103 |