When you switch between single sheets and continuous paper, the printer beeps three times and the PAUSE light comes on.
Cause | What to do |
|
|
You may have tried to change the paper release lever position while paper remained in the printer.
Return the paper release lever to the previous position and eject the paper. Then change the paper release lever position.
Options
When you use the
The paper does not feed.
Cause | What to do |
|
|
The | Reinstall it as described on page 98. |
be incorrectly installed. |
|
|
|
The paper release lever | Check that the paper release lever is |
may be in the wrong | pushed back to the |
position. |
|
|
|
You may have loaded too | Remove some sheets. |
many sheets in the bin. |
|
|
|
Paper may be jammed near | Look for a paper jam. |
the print head. |
|
|
|
The edge guide positions | Position the edge guides at the diamond- |
may be incorrect. | shaped guide marks. |
|
|
There may be only one | Add more paper. |
sheet left in the bin. |
|
Maintenance and Troubleshooting | 87 |