Panel light

Beep

Problem

state

pattern

 

Solution

 

 

 

 

 

f Paper Out

•••

Continuous paper is not fed back to the

n Pause

 

standby position.

 

 

 

 

 

Tear off the printed document at the

 

 

perforation; then press the Load/Eject

 

 

button. The printer feeds the paper to the

 

 

standby position. Press the Pause button

 

 

to turn off the Pause light, if necessary.

 

 

 

 

•••

A single sheet of paper is not fully ejected.

 

 

 

 

 

Press the Load/Eject button to eject the

 

 

sheet. Then press the Pause button to turn

 

 

off the Pause light, if necessary.

 

 

 

 

•••

Paper is jammed in the printer.

 

 

 

 

 

Clear the paper jam as described on

 

 

page 93.

 

 

 

f Pause

The print head is overheated.

 

 

 

 

 

Wait a few minutes; the printer resumes

 

 

printing automatically once the print

 

 

head has cooled.

 

 

 

f All the lights on

•••••

An unknown printer error has occurred.

the control panel

 

 

 

Turn off the printer and leave it off for

 

 

 

 

several minutes; then turn on the printer

 

 

again. If the error recurs, contact your

 

 

dealer.

 

 

 

n= on, f = flashing

•• = short series of beeps (three beeps)

•••• = long series of beeps (five beeps)

Note:

The printer beeps once if you press a control panel button when the corresponding function is not available.

78Maintenance and Troubleshooting