The default settings control many printer functions. While you can often set these functions through your software or printer driver, you may sometimes need to change a default setting from the printer’s control panel using the Default Setting mode.
The following table lists the default settings and the options you can select in Default Setting mode. The settings are explained in detail after the table. For instructions on using Default Setting mode, see page 72.
Settings | Options |
|
|
Page length for tractor | Length in inches: 3, 3.5, 4, 5.5, 6, 7, 8, 8.5, 11, |
| 70/6, 12, 14, 17 |
|
|
Skip over perforation | On, Off |
|
|
Auto tear off | On, Off |
|
|
Auto line feed | On, Off |
|
|
Print direction | |
|
|
Software | ESC/P, IBM 2380 Plus |
|
|
0 slash | On, Off |
|
|
High speed draft | On, Off |
|
|
I/F mode | Auto, Parallel, Serial, USB |
|
|
Auto I/F wait time | 10 seconds, 30 seconds |
|
|
Baud rate | 19200, 9600, 4800, 2400, 1200, 600, 300 BPS |
|
|
Parity | None, Odd, Even, Ignore |
|
|
Data length | 8 bit, 7 bit |
|
|
Parallel I/F bidirectional | On, Off |
mode |
|
|
|
Packet mode | Auto, Off |
|
|
Using the Control Panel | 67 |