3.If you are installing a drive in the lower bay, remove the two retaining screws securing the metal drive bay cover to the front of the computer and remove the cover. Store it in a safe place and save the screws to use later in these steps.

4.If you are installing a 5.25-inch diskette drive, hold it so that the diskette release latch is above the diskette slot. If you are installing a 3.5-inch diskette drive or a 5.25-inch dual drive, hold it so that the diskette release button(s) are on the right and the drive light is on the left.

If you are installing a hard disk drive, hold it so that the component side faces down, and skip to step 7.

Installing and Removing Drives 5-19