Complete instructions for installing the processor are provided in the manual that comes with it. Please follow those instructions carefully, along with the following guidelines:

qAlthough the OverDrive processor User’s Guide instructs you to remove the main system board from the computer, this is not necessary. You can leave the board inside the computer case while you install the processor.

qRefer to the illustration on page 4-3 to locate the microprocessor socket on the system board. You can install the OverDrive processor (or 487SX chip) directly in this socket; however, you need to remove the current microprocessor first. To remove the microprocessor chip, follow the instructions in the next section.

qWhen you install an OverDrive processor, you need to change the jumper setting of J4 to position A.

qAfter you install the processor and replace the computer’s cover, run the SETUP program so your computer can update its configuration. See Chapter 2 for instructions. (You need only run the program and save the configuration; you do not need to change any settings.)

4-22 Installing and Removing Options