If you have forgotten your current password, follow these steps:
1.Turn off the computer.
2.Disable the password function by setting DIP switch 4 to Off. (See Chapter 4 for instructions.)
3.Turn on the computer.
4.Turn the computer off again.
5.Follow the instructions under “Changing the DIP Switch Settings” in Chapter 4 to set DIP switch 4 to the On position.
6.Turn on the computer again.
7.When you see Press <Del> if you want to run| SETUP, press | . You see the SETUP main menu. Press |
to highlight option 3, Set Password options; | |
then press | . If you do not want to set a new |
password, go to step 9. If you want to set a new password, go to step 8.
8.To set a new password, set the Password State option to
Installed and press 
Type a new password at the
prompt and press 
You must enter it twice. (See Chapter 2 for more information.) Now go to step 10.
9. To disable the password, press | until the | |
Password | State option is set to Not | Installed; then |
press | (See Chapter 2 for more information.) | |
10.Save your settings as you exit SETUP. The computer reboots. If you disabled password security, you do not see the password prompt and can access your computer immediately. If you set a new password, you see the password prompt.
Troubleshooting