5.To insert a diskette drive, align the guiderails on each side of the drive with the notches on each side of the drive bay and slide the drive into the bay as far as it will go, as shown below. Secure the guiderails to the computer case with the two retaining screws.
notch
guiderail
6.If you are installing a diskette drive in the lower bay, you need to remove the faceplate on the computer’s front panel because it covers this bay. Turn the cover over and locate the faceplate. Remove the screws securing the faceplate to the inside of the computer’s cover and remove the faceplate, as shown in the following illustration.
5 - 2 0 Installing and Removing Drives