4.To turn on the computer, press the power button on the right side of the front panel.

The power indicator on the left side of the front panel lights up. After a few seconds, the screen displays a count of the system memory, and then the computer performs a power-on diagnostics routine to make sure everything is working correctly.

5.If necessary, use the controls on your monitor to adjust the brightness and contrast until you can easily see the characters on the screen. If your monitor has horizontal and vertical hold controls, you may need to use them to stabilize the display.

6.The screen displays the following prompt:

Press <Del> if you want to run SETUP

Do not press any key yet; you just want to make sure the computer is working. This prompt appears every time you turn on your computer so you can run SETUP if necessary. After a few seconds, the prompt disappears.

Setting Up Your System

1-13