If you see a diskette error message or have difficulty with a diskette drive, follow these steps:
1.If you have problems with a new diskette drive that someone else installed, consult that person about the problem.
2.If you installed the drive yourself, did you carefully follow all the steps in Chapter 5? Review the instructions and check all the cable connections to make sure you installed the drive correctly.
3.Did you run the SETUP program and configure the correct type of diskette drive for your system? (See Chapter 2 for instructions.)
4.If the diskette drive is making loud or unusual noises, do not attempt any further examination of it. Contact the Epson Connection for assistance.
Hard Disk ProblemsIf you have a problem with a hard disk, it could be the result of improper installation, incomplete disk preparation, or corrupted data. Consult one of the following sections:
qInstalling the drive
qPreparing the drive for use
qAccessing data on the drive.
C a u t i o n
If your hard disk has data on it, always be sure to back up your data before reformatting or repartitioning the drive.