2.Did you install the mouse driver correctly? See your software manual and the documentation that came with your mouse for instructions. (Windows installs a mouse driver automatically.)

3.If you are using a serial mouse, did you disable the built-in mouse port with SETUP and enable the correct serial port? See Chapter 2 for instructions.

Memory Module Problems

If you added extra memory to your system by installing SIMMs and that memory is not operating properly, check the following:

1.If the memory count displayed by the power-on diagnostics program is incorrect, you may not have installed the SIMMs correctly. They may be the wrong type of SIMM or they may not be inserted all the way.

See “Memory Modules (SIMMs)” in Chapter 4 and make sure you followed all the instructions.

2.Be sure to run the SETUP program after you install or remove memory modules to automatically update your memory configuration. See Chapter 2 for instructions.

3.If you still have trouble with your SIMMs, write down any error messages that appear and contact the Epson Connection for assistance.

Troubleshooting 6-21