108 The Control Panel
You can enter Maintenance mode by turning on the printer while holding do wn the pause button. See "Maintenance Mode" on page 137 for more information.
/paper feed button Feeds paper in the forward direction.
Ejects cut sheet paper when Sheet is selected
as the paper source.
Feeds the roll paper before cutting it when
Roll Auto Cut On is selected as the paper source.
Loads a sheet from the paper tray to the printing
position automatically when Sheet is selected
as the paper source.
Changes settings when selecting settings in Menu
mode.
paper feed button Feeds paper in the reverse direction as much as
the paper has been fed by using the Paper
Feed button. If you have fed the paper forward by
hand, you cannot feed the paper in the reverse
direction by using this button.
Loads a sheet from the paper tray to the printing
position automatically if Sheet is selected as the
paper source.
Changes a setting in reverse order when selecting
settings in Menu mode.
Menu button Enters Menu mode when pressed in the READY
state.
Enters the PRINTER STATUS menu if pressed during
printing.
Selects the current menu in menu mode.
Sets the selected setting in Menu mode.
Executes the item if the selected item is for
execution only.
Cleans the print head if pressed and held for 3
seconds.
Button Description