Epson 4880 manual Language, Paper Counter, Unit, CUT Pressure, You can select cutting pressure

LANGUAGE

You can select the language to be displayed on the printer’s LCD.

1.In Maintenance mode, press or to highlight LANGUAGE, then press Menu.

2.Press or to select a language.

3.Press Menu to set the language. Confirm that READY (or a similar message in the language selected) appears on the printer’s LCD.

Note:

It may take a while for READY (or a similar message in another language) to appear on the printer’s LCD.

PAPER COUNTER

You can activate the paper remaining counter function. When this function is on, ROLL COUNTER or SHEET COUNTER appears on the PRINTER SETUP menu.

1.In Maintenance mode, press or to display PAPER COUNTER, then press Menu.

2.Press or to select the paper counter function you would like.

3.Press Menu to set the value.

UNIT

You can select a unit of measurement to use to display length. Follow the steps below to select a unit.

1.In Maintenance mode, press or to select UNIT, then press Menu.

2.Press or to select a unit of measure.

3.Press Menu to set the value.

CUT PRESSURE

You can select cutting pressure.

140The Control Panel