Epson 4880 manual PPR Size CHK, PPR Align CHK, Time OUT

When you select a paper margin setting other than DEFAULT, the following number appears on the right side of the paper mark on the printer’s control panel.

Paper Margin setting	Number
T/B 15 mm	1
T/B 25 mm	2
15 mm	1
3 mm	0

When you print the same data with a 3 mm margin and a 15 mm margin and compare the printouts, you may notice that part of the data on the right side of the 15 mm margin printout is missing.

PPR SIZE CHK

When you select ON, the printer stops printing if the width of paper loaded in the printer does not match the width of your print. When you select OFF, the printer continues to print even if the paper width does not match the width of your print, and the printer may print beyond the paper.

Note:

❏When you load the paper using the manual feed slot, select ON.

❏When you perform borderless printing, select ON.

PPR ALIGN CHK

When you select ON, if the paper is not straight, PAPER NOT STRAIGHT appears on the LCD and the printer stops printing. When you select OFF, a paper align error does not occur even if the printer prints beyond the paper, and the printer continues to print.

TIME OUT

The setting range is 30 to 300 seconds. If the cable of your printer is unplugged or your printer hangs up for more than the set time range, the print job is cancelled and the printer feeds the paper.

120The Control Panel