Epson 4880 manual Eject Roller, Drying Time, Suction, Adj

EJECT ROLLER

You can select AUTO, SHEET, ROLL CURLED, or ROLL NORMAL.

AUTO	The printer selects the most appropriate setting
	automatically. When you use Epson media, usually
	select this setting.
SHEET	If you want to print on cut sheet paper that is not Epson
	media, select this setting.
ROLL CURLED	If you want to print on strongly curled roll paper that is
	not Epson media, select this setting.
	Note:
	Make sure that the ink is dry enough on the paper
	before the roller touches the media; otherwise, the ink
	will soil the roller surface, which stamps on the prints.
ROLL NORMAL	If you want to print on roll paper that is non-Epson
	media, select this setting. When roll paper is selected
	for the printer, this parameter is selected and no feed
	roller is used. If you select this parameter while using cut
	sheets, you need to eject the cut sheet paper one by
	one.

DRYING TIME

You can set the ink drying time between each print head pass. The range is from 0 to 10 seconds.

SUCTION

You can set the suction pressure used to feed the paper. Select STANDARD, -1, -2, -3, or -4.

M/W ADJ

You can adjust the MicroWeave mode. The settings are STANDARD, 1 and 2. Increase the value to give priority to print speed, or decrease it to give priority to print quality.

The Control Panel 127