Epson 4880 manual Printing with Windows

2. Click Margins. You see a window like this one.

3.Select the edge of the paper where binding will be placed. You can choose Left, Top, or Right.

4.Specify the width of the binding margin in the Binding Margin text box. You can specify any width from 0.12 to 1.18 in. (3.0 to 30.0 mm).

Note:

The actual binding margin may vary depending on the settings specified in your application. We recommend that you print a test print before printing an entire job.

5.Click OK to return to the Page Layout tab, and then click OK to save your settings.

6.Make sure paper is loaded, and then send a print job from your application. Instructions for printing the even-numbered pages will be displayed while the odd-numbered pages are being printed.

7.Follow the on-screen instructions to reload the paper and print the even numbered pages.

Note:

❏The paper may curl during printing due to the amount of ink used. If this happens, slightly curl the sheets in the opposite direction prior to reloading them into the printer.

❏Align the stack of sheets by tapping them against a hard, flat surface prior to reloading them into the printer.

❏Follow the on-screen instructions provided when reloading the printed pages. Paper jams or improperly placed binding margins may occur if the pages are not reloaded correctly.

❏In the event of a paper jam, see "Clearing paper jams" on page 209.

8.Once the paper is reloaded, click Resume to print the even-numbered pages.

Printing with Windows 79