138 The Control Panel
1. Enter Maintenance mode
Make sure the printer is turned off. Then press and hold the pause
button, and then press the Ppower button to turn on the printer.
2. Select a menu item
Press or to select a menu item.
3. Enter the menu item
Press Menu to enter the selected menu item. The first parameter is
displayed on the printer’s LCD.
4. Select an option
Press or to select an option for the menu item.
5. Set the option
Press Menu to store the selected option.
If the option is for execution only, press Menu to execute the function
for the item.
Note:
If a second option is displayed on the printer’s LCD, repeat steps 4 and 5 to select
and set the second option.
6. Exit Maintenance mode
Press the Ppower button to turn off the printer, and then turn it on again.
Maintenance mode list
Item First parameter Second Parameter
"HEX DUMP" on page 139 PRINT EXEC
"LANGUAGE" on page 140 ENGLISH, FRENCH,
ITALIAN, GERMAN,
SPANISH,
PORTUGUESE,
DUTCH
-
"PAPER COUNTER" on page
140
OFF, ROLL PAPER,
CUT SHEET
-
"UNIT" on page 140 METER, FEET/INCHES -
"CUT PRESSURE" on page
140
0%-150% -
"SSCL" on page 141 EXEC -