Epson 4880 manual Aligning the print head

1.Make sure the printer is turned on and the ink status light is off, and that a few sheets of A4/Letter size or larger paper is loaded in the printer’s auto sheet feeder.

2.Click Head Cleaning.

3.Follow the on-screen instructions.

4.Click Print Nozzle Check Pattern in the Head Cleaning dialog box to confirm that the head is clean and to reset the cleaning cycle.

If dots are still missing after cleaning, try the following:

❏Repeat this procedure three or four times, turn the printer off and let it sit overnight, and then try head cleaning again.

❏Select POWER CLEANING from the control panel on the printer. See "PWR CLEANING" on page 128. This consumes ink, so only use this cleaning when necessary. You can also use the LFP Remote Panel to run a power cleaning.

❏Replace any ink cartridge that is old or damaged.

If the print quality remains a problem after you have tried these solutions. See "Where To Get Help" on page 229.

Aligning the print head

If you see misaligned lines or black or white vertical banding in your printed image, you may be able to solve the problem using the Print Head Alignment utility to align the print head.

1.Make sure that the printer is turned on, it’s in the READY state, and that a few sheets of A4/Letter size or larger Epson media are loaded in the printer’s auto sheet feeder.

2.Click Print Head Alignment.

3.Follow the on-screen instructions to align the print head.

90Printing with Windows