Epson 4880 manual Maintenance Mode, Setting the alert value for paper

Setting the alert value for paper

You can configure the printer to alert you when paper is low. Follow the steps below.

Note:

This setting is available only when you select ROLL or SHEET as your PAPER COUNTER setting in Maintenance mode.

1.Press Menu to enter the printer’s menu system.

2.Press or to highlight PRINTER SETUP, then press Menu.

3.Press or to highlight ROLL COUNTER or SHEET COUNTER (depending on which setting you selected in Maintenance mode), then press Menu.

4.Press or to select the length of the roll paper (between 15 and 300 ft or 5 and 99.5 m) or the number of cut sheets (between 10 and 250) loaded in the printer, then press Menu.

5.The screen changes so that you can select the alert value. Press or to select the alert value. For roll paper, select a value between 3 and 50 ft or 1 and 15 m. For cut sheet paper, select a value between 5 and 50.

6.Press Menu to set the alert value, then press pause to return to the

READY state.

Maintenance Mode

Maintenance mode setting procedure

This section describes how to enter Maintenance mode and how to select settings with the buttons on the control panel.

Note:

Press to return to the previous step.

The Control Panel 137