The Control Panel 121
CUTTER ADJ
You can adjust the paper cutting position (for when you print with a top and
bottom margin of zero). This function prints cutter adjustment patterns and
you can select the appropriate cutting position from them.
REFRESH MRGN
When you select ON, the printer cuts an extra area of paper at the end of
borderless prints.
SHEET SIZE CK
When you select ON, if the size of the cut sheet paper loaded in the printer
does not match the size of data, the printer stops printing and WRONG PAPER
SIZE appears on the printer’s control panel. When OFF is selected, the printer
continues to print even if the size of the cut sheet paper does not match the
data, and the printer may print beyond the paper.
AUTO NZL CK
When you select ON, the printer performs a nozzle check before printing, for
each print job.
Note:
❏Do not select ON if you are using non-Epson media, or if the width of paper you
are using is less than 210 mm.
❏This setting is available only when you select ON as the AUTO CLEANING setting.
AUTO CLEANING
When you select ON and perform a nozzle check from the printer driver or the
control panel, the printer not only checks for clogged nozzles, but also
performs head cleaning automatically.
Note:
Do not select ON if you are using non-Epson media, or if the width of paper you are
using is less than 210 mm.
QUIET CUT
When you select ON, the printer cuts the printout slowly to decrease the
amount of paper particles.