Epson 4880 manual Printing a status sheet, Selecting the registered settings

21.Press , then press . You see M/W ADJ in the lower row of the LCD.

22.Press Menu, press or to adjust MicroWeave. Increase the value to give priority to the print speed, or decrease it to give priority to the print quality. Press Menu again to save the selected value.

Selecting the registered settings

Follow the steps below to select the registered settings.

1.Press Menu to enter the printer’s menu system, press or to highlight CUSTOM PAPER, then press Menu again. You see

PAPER NUMBER.

2.Press or to select the paper number you want to use, then press Menu to save the selected paper.

If you select STANDARD, the printer prints your images according to the paper setting you choose in the printer driver.

If you select No. X, the control panel settings override the paper settings in the printer driver.

3.Press pause to exit the printer menu.

Printing a status sheet

While in Menu mode, you can print a status sheet to see the printer’s current settings and life counter information. Follow the steps below to print a status sheet.

1.Make sure that paper is loaded in the printer and that the printer is in the READY state.

2.Press Menu to enter the printer’s menu system.

3.Press or to highlight TEST PRINT, then press Menu.

4.Press or to highlight STATUS CHECK, then press Menu twice to print a status sheet.

After printing is finished, the printer exits the printer menu and returns to the READY state.

136The Control Panel