120Printing with EPSON Drivers for Windows
PhotoEnhance4 settings
Tone | Lets you choose from Normal for standard tone correction, |
| Hard for high contrast, Vivid for more intense colors (as |
| defined above), Sepia, Monochrome, and None (no tone |
| adjustment). |
|
|
Effect | Lets you choose from four special effects (and set the |
| intensity using the Low/High slider): Sharpness, Soft |
| Focus, Canvas, and Parchment. |
|
|
Digital Camera | Corrects noise and other flaws common to digital camera |
Correction | images. |
|
|
Note
These settings are overridden by any paper configuration settings you may have made using the printer’s control panel (page 84).
Paper Configuration Settings
To access the paper configuration settings, click the Paper Config button in the Advanced dialog box. The following settings are available.
Paper Configuration settings
Color Density | Controls the ink saturation level (for example, when you turn |
| off color management in your printer software). |
|
|
Drying Time | Use when printing with |
per Print Head | the print head wait up to 5 seconds after each pass to allow |
Pass | ink to dry on the page. |
|
|
Paper Feed | Eliminates light or dark horizontal banding in your printouts. |
Adjustment |
|
|
|
Paper | Eliminates vertical banding and creates a sharper image |
Thickness | when printing on unusually thick or thin paper. |
|
|
Paper Suction | Decreases the paper suction level when printing on thinner |
| papers (less than 12 lb), such as CAD drafting paper or |
| backlight film. |
|
|
Cut Method | Decreases the cutting blade pressure for thinner papers, to |
| provide a cleaner cut. |
|
|