42Setting Up the Printer

Loading Roll Paper

Before you begin, locate the roll paper that came with your printer and remove it from its protective packaging. The paper may already be loaded on the spindle. (If it isn’t, see “Loading the Paper onto the Spindle” on

page 70.)

Follow these steps to place the paper in the printer:

1.Open the roll paper cover.

2.Place the roll paper in the printer as shown. (The white end of the spindle goes on the right.)

Note

To avoid feeding excess paper, make sure you don’t select Sheet when you’re using roll paper.

3.Make sure the printer is turned on, then press the Paper Source button until the Roll Auto Cut light comes on.