48 Setting Up the Printer
Caution
You must unplug the printer from the power outlet, or you may damage the printer and the card.
Installing and Connecting to an Optional Interface Card
To connect the printer to an optional FireWire or Ethernet card, you first need to install the card in your printer. You also need the appropriate cable. Follow the steps below.
1.Turn off your computer and your printer.
2.IMPORTANT: Unplug the printer from its electrical outlet. Not doing so may cause damage to the printer and the card.
3.Disconnect any interface cables from the printer.
4.Remove the two screws and take off the interface slot cover as shown:
5.Set the DIP switches and jumpers on the card, if necessary. See the manual that came with the card for details.