86Handling Paper and Other Media

6.Examine the printed pattern for the most evenly overlapping lines. In the example shown above, the lines under number 4 are the most even.

7.Use the u and d buttons to display the selected line number, then press Enter to save your new setting.

8.The menu options shown below appear in sequence. Make any adjustments, as needed, and press Enter to save each setting.

The following settings are available:

Menu option

Function

 

 

CUT

Decreases the cutting blade pressure for thinner papers.

PRESSURE

Provides a cleaner cut.

 

 

CUT METHOD

Lets you choose between a 3-step and 4-step cutting

 

method. For more exact cuts on thicker or thinner paper,

 

choose 4-step.

 

 

PPR FEED

Lets you eliminate light or dark horizontal banding in your

ADJUSTMENT

printouts. When set to 0, the EPSON driver adjusts the

 

paper feed automatically.

 

 

DRYING TIME

Use when printing with non-EPSON media. You can make

 

the print head wait up to 5 seconds after each pass to allow

 

ink to dry on the page.

 

 

SUCTION

Lets you decrease the paper suction level when printing on

 

thinner papers (less than 12 lb), such as CAD drafting paper

 

or backlight film.

 

 

PRINT ADJ

Adjusts the intensity of the MicroWeave pattern. Improves

 

print quality but lowers printing speed.

 

 

9. When done, press the Pause button.

Once you have created a paper profile, you can select it whenever you print on that paper:

1.Press the SelecType button, then press the d button until PAPER CONFIG appears on the display.

2.Press the r button until PAPER NUMBER appears.

3.Press the r button.