Note
Any settings made this way override settings made in the driver or RIP software .
| Handling Paper and Other Media 85 |
|
|
Menu option | Function |
|
|
DRYING TIME | Use when printing with |
| can make the print head wait up to 5 seconds after |
| each pass to allow ink to dry on the page. |
|
|
SUCTION | Lets you decrease the paper suction level when |
| printing on thinner papers (less than 12 lb), such |
| as CAD drafting paper or backlight film. |
|
|
PRINT ADJ | Adjusts the intensity of the MicroWeave® pattern. |
| Improves print quality but lowers printing speed. |
|
|
4.Use the u and d buttons to make any necessary changes, then press Enter to save your new setting.
5.To adjust another setting, press the l button to return to the menu options.
6.When done, press Pause to exit the menu.
Creating and Selecting Paper Profiles
To create a profile for a specific paper type, make sure the paper you want to profile is loaded in the printer. Then follow these steps:
1.Press the SelecType button, then press the d button until PAPER CONFIG appears on the display.
2.Press the r button until PAPER NUMBER appears.
3.Press the r button.
4.Use the u and d buttons to assign a paper profile number (1 to 10), then press Enter.
5.Press Enter again to print the paper thickness pattern. The printer prints a pattern similar to the following:
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 |