Note
If you notice banding or other printing problems after replacing a cartridge, air may have entered the ink delivery system. Remove the cartridge then reinstall it to make sure it’s seated properly. Then run several print head cleaning cycles (see page 132), followed by a nozzle check to verify the results.
Maintaining and Transporting the Printer 145
7. Lower the ink lever to its locked position.
8.If you’re using 110 ml cartridges, close the ink compartment cover. If you’re using 220 ml cartridges, you’ll have to leave the cover open.
Once the cartridges are installed, the printer returns to its READY state (or says LOAD PAPER if paper isn’t loaded).
If you see the message WRONG INK CARTRIDGE, you may have loaded an incorrect black ink cartridge for the black ink mode you’re currently in, or loaded a cartridge containing the wrong type of ink for your printer (Photographic Dye or UltraChrome). Remove any cartridges indicated by a red Ink Out light on the control panel, and replace them with the correct cartridges.