Note

The display indicates which cartridges will be installed in the first and second ink slots (Matte Black, Light Black, or Photo Black). You may not need to replace both cartridges, depending on the mode you want to switch to.

Caution

Do not turn off the printer once the cartridges are removed.

If a power failure occurs, turn the printer back on. You can resume the procedure at the point where it was interrupted.

Maintaining and Transporting the Printer 149

5.Press Enter. You see SELECT INK SET.

6.Press u or d to select the correct option for the ink mode you want to switch to:

Ink mode

Option displayed on printer

 

 

Matte Black Mode

#1 MAT: #2 LBK

 

 

Dual Matte Black Mode

#1 MAT: #2 MAT

 

 

Photo Black Mode

#1 PBK: #2 LBK

 

 

7.Press ENTER.

If you see the message NOT ENOUGH INK, lift the ink lever and remove any low or empty cartridges. (Check the Ink Out lights on the control panel to see which cartridges are low or empty.) Insert the replacement cartridge(s), then lower the ink lever.

8.The printer displays a message telling you to release the ink lever and remove the cartridges. Raise the lever and remove all the cartridges; do not re-insert them until instructed to do so.

Be sure to set aside any black ink cartridges you won’t be using, so that you don’t accidentally re-insert them.