22Setting Up the Printer
5.Take out the foam supports from under the printer.
6.Remove any packing tape. Check these areas:
•the front cover
•the ink compartment cover (in front on the left)
•the maintenance tank (on the right side near the bottom)
Warning
Two or more people are required to lift the printer.
7.Open the front cover. Then unscrew the bolt and remove the bracket securing the print head. Save the bolt and bracket in case you need to ship the printer.
8. If you want to set the printer on a desk, use at least two people to hold it as shown. Otherwise follow the instructions in the next section to mount it on the optional stand.