Setting Up the Printer 19
Accessories:
GHI
JKLM
G:Allen wrench (1)
H:Bolts (4)
I:Bolts (2)
J:Collars (2)
K:Phillips screws with washers (4)
L:Wing screws (2)
M:Washers (2)
for attaching legs to base
for attaching lower bar to legs for attaching lower bar to legs
for attaching top support bar to legs for attaching printer to stand
for attaching printer to stand
2.Insert one of the legs into the base as shown. (The bolt holes line up only if the leg is matched with the correct base.) Use the included Allen wrench to fasten the leg with two bolts (H).
Bolt holes
Underside view of base
showing location of bolt holes
H 