Note
It’s a good idea to store partially used cartridges in separate, resealable plastic bags.
Maintaining and Transporting the Printer 159
4.Reinstall the carriage locking bracket and screw that was removed during setup. (See page 22 for the Stylus Pro 7600 or page 33 for the Stylus Pro 9600.)
5.Remove the following parts:
•Power cord and interface cables
•Paper basket
•Roll paper spindle
•All paper or other media
•Optional auto
•Optional manual cutter (if installed)
6.Make sure the ink cartridge lever is lowered and the ink cover is closed. Since the ink was drained from the printer, no ink cartridges should be installed.
7.If the printer is mounted on a stand, you’ll need to remove it from the stand. First make sure the casters are locked and the two stabilizer knobs are touching the floor.
caster lock
stabilizer knob
8.Remove the two wing nuts and lock washers securing the printer to the stand (underneath the printer). Keep them in a safe place.