COMMAND 1: BUFFER SIZE

Selects logical default buffer size

VALUE DESCRIPTION

1960 characters

*2 1920 characters

32560 characters

43440 characters

53564 characters

NOTES: This command, along with the ‘Z99,0’command, changes the logical buffer size selection in the non-volatile memory of the interface. The logical buffer size is only reported to the host the next time the unit is powered up.

The physical buffer size is permanently set at 4K.

EXAMPLE: &%Z1,3

Sets logical buffer size to 2560 characters.

COMMAND 2: LINES PER INCH

Selects default LPI.

VALUE DESCRlPTlON

33 LPI

44 LPI

*6

6 LPI

8

8 LPI

NOTES: This default emulates the front panel selection on an IBM printer.

The IBM host can control the LPI unless Command 36 is used to select override of host LPI commands.

EXAMPLE: &%Z2,8

Sets the printer to 8 LPI default