COMMAND 36: SUPPRESS IBM CONTROL CODES
This function is used to select suppression of all or some IBM control codes sent from the host system.
VALUE DESCRIPTION
*0 Obey all IBM control codes
1Suppress all IBM control codes
2Suppress only LPI and CPI control codes
3Suppress only CPI control codes
4Suppress only LPI control codes
5Suppress print quality specified in the PPM command.
NOTES: If this command is set to 1, documents will have to be formatted by sending transparent control codes to the printer using Command-
If this command is set to 2, the SCS pitch (CPI) and line density (LPI) commands are suppressed (Not sent to the printer).
EXAMPLE: &%Z36,2 No LPI or CPI commands are sent to the printer. The printer prints using the user specified selections.
COMMAND 37: VERTICAL CHANNEL SELECT (VCS)
Specifies vertical channel select VCS) emulation.
VALUE DESCRIPTION
0 3287 VCS emulation
*1 | 3268/4214/4224 VCS emulation |
EXAMPLE: &%Z37,0 Selects 3287 VCS emulation