3User Defined mode; documents are printed using the fonts and orientation that the user specifies through use of the &% font ID commands.
EXAMPLE: &%Z62,3 Specifies that the document is printed as formatted when the primary paper tray is specified as the paper source.
COMMAND 63: ALTERNATE PAPER TRAY ORIENTATION (LASER)
This command functions identically to Command 62 except it controls the orientation for printing that specifies (SCS,LU1) the alternate tray for the paper source.
Values are the same as Command 62 except substitute ‘alternate tray’for ‘primary tray’in the descriptions.
NOTES: Even if the printer does not have an alternate paper tray and defaults to the primary tray, if the SCS (LUl) host specifies the alternate tray, the interface prints the document in accordance with the selection in Command 63.
The value 3 is an excellent choice when COR is not required, since the user can decide the fonts and orientation he desires by using &% font ID commands.
EXAMPLE: &%Z63,2 Specifies that landscape orientation will be used for all printing in which the SCS (LU1) PPM code specifies the alternate paper tray be used.
COMMAND 64: MANUAL FEED TRAY ORIENTATION (LASER)
This command functions identically to Command 62 except it controls the orientation for printing when the PPM Command specifies the manual feed tray far the paper source.
Values are the same as Command 62 except substitute ‘manual feed tray’in place of ‘primary tray’in the descriptions.
NOTE: A laser printer, upon receipt of the manual feed tray command, does not proceed with printing until paper is placed into the manual feed slot. This allows a user to insert special forms, letter head, or colored paper into the manual feed slot.