COMMAND 6: MAXIMUM PRINT POSITION
Selects current and default Maximum Print Position, the maximum number Of characters which can be printed on each line.
VALUE DESCRIPTION
000Infinite Line Length
001Set MPP in number of characters
to
* 132 (Factory Default)
NOTES: Normal values are 80, 132, or 198 characters.
This default emulates the front panel selection on an IBM printer,
MPP and the current position will not be changed by changes in CPI.
The infinite line length will place no limits on the number of characters that can be sent to the printer on a single line.
EXAMPLE: &%Z6,80 | Sets MPP to 80 characters |
COMMAND 7: PRINT CASE
Selects default Print Case
VALUE DESCRIPTION
0Mono case
*1 Dual case
NOTES: Mono case = Upper case characters only
Dual case = Upper and lower case characters
This default only affects LU3 printing
EXAMPLE: &%Z7,0 | Sets default to mono case |