VALUE DESCRIPTION

*0 No extra FF is sent

1 Send FF after time out value

NOTES: The time-out value is the same as the time-out used to switch between host and alternate host printer sharing. (See Command 51)

Generally, the host application generates a termination FF, and there is no need to change this command from the default.

In duplex printing, the last page will be ejected.

EXAMPLE: &%Z27,1 Sends FF after time delay selected by command 51 (default = 10 sec.) when unprinted data remains in the print buffer.

COMMAND 31: TRUNCATE/WRAP SELECT

The user can select whether the interface truncates or wraps the text if the maximum print position is exceeded.

VALUE DESCRIPTION

* 0 Allow text to print on next line when maximum print position is exceeded.

1 Truncate text beyond the maximum print position

EXAMPLE: &%Z31,1 Causes text which exceeds the maximum print

position to be lost.

COMMAND 32: PAPER SIZE (LASER)

Specifies the paper size used for printing

VALUE DESCRIPTION

*0 Selects 8 1/2" X 11" letter paper

1Selects 210mm X 297mm (8.27’X 11.69”) A-4 paper

2 Selects 8 1/2” X 14” legal paper

EXAMPLE: &%Z32,1 The interface tells the printer to use A-4 paper.

A-13