EPSON AcuLaser C9200 Series User's Guide
Calibrating Printer
The printer automatically calibrates itself. This is not an error message, and will clear itself after the calibration process has finished. While the printer displays this message, do not open the covers or turn off the printer.
Cancel All Print Job
The printer is canceling all print jobs in the printer memory, including jobs the printer is currently receiving or printing. This message appears when the + Cancel Job button has been pressed down for more than 2 seconds.
Cancel Print Job
The printer is canceling the current print job. This message appears when the + Cancel Job button has been pressed and released within 2 seconds.
Cancel Print Job (by host)
The print job is canceled at the printer driver.
Can’t Print
The print data is deleted because it is incorrect.
Make sure the appropriate paper size and printer driver are used.
Can’t Print Duplex
The printer has encountered problems during duplex printing. Make sure you are using an appropriate type and size of paper for the duplex printing. The problem could also be a result of incorrect settings for the paper source you are using. Pressing the Start/Stop button will print the rest of the print job on only one side of the paper. Press the + Cancel Job button to cancel the print job.
Can’t Use Bookmark
The registered menu cannot be used because the menu is disabled by changing any settings after registered the menu in bookmark.
CF CHECK
The printer is checking the CompactFlash memory.
Using the Control Panel 107