EPSON AcuLaser C9200 Series User's Guide
❏If you are unable to insert the AC plug into the electrical outlet, contact an electrician.
❏Use the type of power source indicated on the label. If you are not sure of the type of power available, consult your dealer or local power company.
❏When connecting this product to a computer or other device with a cable, ensure the correct orientation of the connectors. Each connector has only one correct orientation. Inserting a connector in the wrong orientation may damage both devices connected by the cable.
❏If you use an extension cord, make sure that the total of the ampere ratings on the products plugged into the extension cord does not exceed the extension cord ampere rating.
❏Unplug this printer from the wall outlet and refer servicing to a qualified service representative under the following conditions:
A.When the power cord or plug is damaged or frayed.
B.If liquid has been spilled into it.
C.If it has been exposed to rain or water.
D.If it does not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.
E.If it has been dropped or the cabinet has been damaged.
F.If it exhibits a distinct change in performance, indicating a need for service.
When using the printer
❏The printer weighs about 60 kg (132 lb). One person should not attempt to lift or carry the printer. Two people should carry it.
❏Follow all warnings and instructions marked on the printer.
❏Unplug this printer from the wall outlet before cleaning.
❏Use a
❏Do not use printer in a damp environment.
❏Never push objects of any kind through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock.
Safety Instructions 17