Epson C9200 Series The printer does not print, Printing in the PCL5/PCL6 Mode Problems, The edges of texts and/or images are not smooth

EPSON AcuLaser C9200 Series User's Guide

Printing in the PCL5/PCL6 Mode Problems

The problems listed in this section are those that you may encounter when printing in the PCL5/ PCL6 mode. All procedural instructions, refer to the PCL5/PCL6 printer driver.

The printer does not print

Cause	What to do
The Print to file check box is selected in the Print	Clear the Print to file check box in the Print dialog box.
dialog box.

The printer does not print correctly in the PCL mode

Cause	What to do
(PCL5c mode only) Graphics Mode may be set to	Access the printer driver, click the General tab, click Options, then
HP-GL/2and the printing data may include the data	select Raster as Graphics Mode.
that cannot be printed in the setting.
Scaling is done when printing with download fonts.	Access the printer driver, click the General tab, click Options, then
	select Raster as Graphics Mode. Select None from the TrueType
	Font Download drop-down list.

The font on the printout is different from that on the screen

Cause	What to do
The EPSON screen fonts are not installed.	The screen fonts must be installed on the computer that you are
	using. Otherwise, the font that you select is substituted by some
	other font for display on the screen.

The edges of texts and/or images are not smooth

Cause	What to do
The resolution is set to Fast (300 dpi).	Access the printer driver, click the Print Quality tab, then select Fine
	(600 dpi) as the resolution.

Troubleshooting 214