EPSON AcuLaser C9200 Series User's Guide

In a network environment

For Mac OS X users

Note:

❏Although EPSON FireWire appears in the interface pop-up list, you cannot use FireWire for printer connection in the PostScript 3 mode.

❏You need to make the settings for your installed options manually when the printer is connected using USB, IP printing, or Bonjour (Rendezvous). When the printer is connected using AppleTalk, the printer software automatically makes the settings.

❏Make sure to specify ASCII as the data format in the application.

1.For Mac OS X 10.5 users, open the System Preferences, and then double-click the Print & Fax icon.

For Mac OS X 10.4 or below users, open the Applications folder, open the Utilities folder, and then double-click Printer Setup Utility.

The Printer List window appears.

2.Click Add in the Printer List window.

3.Select the protocol or the interface that you are using from the pop-up list.

Note for AppleTalk users:

Make sure to select AppleTalk. Do not select EPSON AppleTalk, because it cannot be used with the PostScript 3 printer driver.

Note for IP Printing users:

❏Make sure to select IP Printing. Do not select EPSON TCP/IP, because it cannot be used with the PostScript 3 printer driver.

❏After selecting IP Printing, enter the IP address for the printer, then make sure to select the Use default queue on server check box.

Note for USB users:

Make sure to select USB. Do not select EPSON USB, because it cannot be used with the PostScript 3 printer driver.

About the PostScript Printer Driver 245