EPSON AcuLaser C9200 Series User's Guide
Cause | What to do |
|
|
The electrical outlet may be controlled by an outside | Make sure that the switch is turned on or plug another electrical |
switch or an automatic timer. | device into the outlet to check whether the outlet is operating |
| properly. |
|
|
Cause | What to do |
|
|
The printer is offline. | Press the Start/Stop button once to switch the printer to ready |
| status. |
|
|
Some error may have occurred. | Check the LCD panel to see if an error message appears. |
|
|
Cause | What to do |
|
|
Your computer may not be properly connected to the | Perform the procedure illustrated in the Setup Guide. |
printer. |
|
|
|
The interface cable may not be plugged in securely. | Check both ends of the interface cable between the printer and |
| the computer. |
|
|
You may not be using the correct interface cable. | If you are using the parallel interface, make sure that the cable is |
| a |
| feet in length. |
| If you are using the USB interface, use a Revision 2.0 cable. |
|
|
Your application software is not properly set up for your | Make sure that the printer is selected in your application software. |
printer. |
|
|
|
Your computer system’s memory is too small to handle | Try reducing the image resolution of your document in the |
the volume of data in your document. | application software, or install more memory in your computer if |
| you can. |
|
|
Cause | What to do |
|
|
The printer does not recognize the optional product. | Print a configuration status sheet to see if the printer recognizes |
| the optional product. If not, reinstall the optional product. |
|
|
Troubleshooting 196