Epson C9200 Series Using the Reserve Job Function

EPSON AcuLaser C9200 Series User's Guide

After you install EPSON Web-To-Page, the menu bar is displayed on the Microsoft Internet Explorer Toolbar. If it does not appear, select Toolbars from the View menu of Internet Explorer, and then

select EPSON Web-To-Page.

Using the Reserve Job Function

This function allows you to store print jobs on the printer’s memory and to print them later directly from the printer’s control panel. You can prevent the printed document from being looked at by other people by applying a password to the print job.

This function uses the following types of printer memory.

Printer’s Storage	Description
CompactFlash	The optional CompactFlash memory must be installed on your printer in order to use
	the Reserve Job function. Make sure that the CompactFlash memory is correctly
	recognized by the printer driver before you start using the Reserve Job function.
RAM Disk	You need to keep sufficient RAM disk capacity in order to use the Reserve Job
	function.
	To enable the RAM disk, you have to set the RAM Disk setting on the control panel to
	Normal or Maximum. For instructions about increasing your printer’s memory, see
	“Installing a memory module” on page 150.
	After the memory module is installed, you must update the option information. See
	“Making Optional Settings” on page 217.
	When both CompactFlash memory and a RAM disk are installed, CompactFlash
	memory is given priority and makes the RAM disk unavailable.

The table below gives an overview of the Reserve Job options.

Reserve Job Option	Description
Re-Print Job	Lets you print the job now and store it on the printer’s memory. You can print the same
	job several times.
Verify Job	Lets you print one copy now to verify the content. You can print multiple copies later.
Stored Job*	Lets you store the print job on the printer’s memory without printing it now.

Printing Tasks 76