Epson C9200 Series Troubleshooting, Clearing Jammed Paper, Precautions for clearing jammed paper

EPSON AcuLaser C9200 Series User's Guide

Chapter 7

Troubleshooting

Clearing Jammed Paper

If paper becomes jammed in the printer, the printer’s LCD panel and EPSON Status Monitor provide alert messages.

Precautions for clearing jammed paper

Be sure to observe the following points when you clear jammed paper.

❏Do not remove jammed paper by force. Torn paper can be difficult to remove and might cause other paper jams. Pull it gently in order to avoid tearing.

❏Always try to remove jammed paper with both hands to avoid tearing it.

❏If jammed paper is torn and remains in the printer, or if paper is jammed in a place not mentioned in this section, contact your dealer.

❏Make sure that the paper type that is loaded is the same as the Paper Type setting in the printer driver.

w❏ Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use, the fuser and the surrounding areas may be very hot. If you must touch one of these areas, wait 30 minutes to allow the heat to subside before doing so.

❏Do not insert your hand deep into the fuser unit as some components are sharp and may cause injury.Warning:

Troubleshooting 183