EPSON AcuLaser C9200 Series User's Guide

Note:

The PCL5/PCL6 printer driver and EPSON Status Monitor cannot be used at the same time.

Installing the PCL5/PCL6 printer driver

Note:

❏Installing the printer software for Windows XP or 2000 may require administrator privileges. If you have problems, ask your administrator for more information.

❏Turn off all virus protection programs before installing the printer software.

❏The examples in this section are from the Windows XP operating system. They may vary in appearance from what actually appears on your screen; however, the instructions are the same.

1.Make sure that the printer is turned on.

2.Double-click SETUP.EXE. The End User License Agreement dialog box appears.

3.Select the name of your printer, then click OK.

4.Read the license agreement, then click Accept.

The EPSON Printer Utilities Setup dialog box appears, and the program searches for the printer and automatically configures the port.

Note:

If you are using a parallel interface cable, click Cancel, and then click OK. The parallel port is configured automatically.

5.When the installation is complete, click OK.

After the installation is done, click Printer Properties to make the appropriate settings.

Note:

If you want to change the settings, you can access the PCL5/PCL6 printer driver by clicking Document Default.

Accessing the PCL5/PCL6 printer driver

You can change the PCL5/PCL6 printer settings in the PCL5/PCL6 printer driver. To access the printer driver, see “Accessing the printer driver” on page 216.

About the PCL5/PCL6 Printer Driver 250