|
| EPSON AcuLaser C9200 Series User's Guide | |
|
| ||
| The printer does not print correctly in the PostScript mode | ||
|
|
|
|
| Cause | What to do |
|
|
|
|
|
| The printer’s emulation mode setting is incorrect. | The printer is set to the Auto mode by default, so that it can |
|
|
| automatically determine the encoding used in the received print |
|
|
| job data and select the appropriate emulation mode. However, |
|
|
| there are situations where the printer cannot select the correct |
|
|
| emulation mode. In this case, it must be set manually to PS3. |
|
|
| Set the emulation mode through the SelecType Emulation Menu |
|
|
| on the printer. See “Emulation Menu” on page 85. |
|
|
|
|
|
| The printer’s emulation mode setting for the interface | The emulation mode can be set individually for each interface |
|
| that you are using is incorrect. | which receives print job data. Set the emulation mode for the |
|
|
| interface you are using to PS3. |
|
|
| Set the emulation mode through the SelecType Emulation Menu |
|
|
| on the printer. See “Emulation Menu” on page 85. |
|
|
|
|
|
| The printer does not print |
|
|
|
|
| |
| Cause | What to do |
|
|
|
|
|
| The Save as File check box is selected on the Output | Clear the Save as File check box on the Output Options sheet in |
|
| Options sheet in the Print dialog box (for Mac OS X | the Print dialog box. |
|
| 10.3.9). |
|
|
|
|
|
|
| An incorrect printer driver is selected. | Make sure that the PostScript printer driver that you are using to |
|
|
| print is selected. |
|
|
|
|
|
| The Emulation Menu in the printer’s Control Panel is set | Change the mode setting to either Auto or PS3. |
|
| to a mode other than Auto or PS3 for the interface that |
|
|
| you are using. |
|
|
|
|
|
|
The printer driver or printer that you need to use does not appear in the Print & Fax (for Mac OS X 10.5) or Printer Setup Utility (Mac OS X 10.4 or below)
Cause | What to do |
|
|
The printer name has been changed. | Ask the network administrator for details, then select the |
| appropriate printer name. |
|
|
The AppleTalk zone setting is incorrect (for Mac OS X 10.4 | Open the Printer Setup Utility, then select the AppleTalk zone |
or below). | that the printer is connected to. |
|
|
Troubleshooting 211