EPSON AcuLaser C9200 Series User's Guide
6. Fasten the left side cover with the two screws.
7. Reconnect the interface cable and power cord and turn the printer on.
To confirm that the option is installed correctly, print a Status Sheet. See “Printing a Configuration Status Sheet” on page 195.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver. See “Making Optional Settings” on page 217.
Note for Macintosh users:
When you have attached or removed printer options, you need to delete the printer using Print & Fax (for Mac OS X 10.5) or Print Setup Utility (for Mac OS X 10.4 or below), and then
wBe careful when working inside the printer as some components are sharp and may cause injury.Warning:
cBefore you remove a memory module, be sure to discharge any static electricity by touching a grounded piece of metal. Otherwise, you may damage
Perform the installation procedure in reverse.
Installing Options 153